Sleeve Nuts

Sleeve nuts come with thread right hand one end and left hand thread the other unless specified otherwise. They are often used with high strength tie rods in lieu of turnbuckles. They are typically round with wrench flats, hex, or can be ordered with a hex center and tapered ends.

wrench-flat-round-coupling-nut-285 hex-coupling-nut-285

Sleeve Nut Dimensions

Click table to show drawing
Diameter, Inches D Dimensions, Inches Weight, Pounds
F C Length L
Dimensions per AISC Manual of Steel Construction ninth edition, page 4-150
12 78 1 4 .43
58 1116 1732 5 .93
34 114 1716 5 1.12
78 1716 158 7 1.75
1 158 11316 7 2.46
118 11316 2116 712 3.10
114 2 214 712 4.04
138 2316 212 8 4.97
112 238 21116 8 6.16
158 2916 21516 812 7.36
134 234 318 812 8.87
178 21516 3516 9 10.42
2 31/8 31/2 9 12.24
214 312 31516 912 16.23
212 378 438 10 21.12
234 414 41316 1012 26.71
3 458 514 11 33.22
314 5 558 1112 40.62
312 538 6 12 49.07
334 534 638 1212 58.57
4 618 678 13 69.22
414 612 712 1312 75.00
412 678 71516 14 90.00
434 714 838 1412 98.00
5 758 878 15 110.0
514 8 914 1512 122.0
512 838 934 16 142.0
534 834 1018 1612 157.0
6 918 1058 17 176.0